·It can display residual chlorine, water flow and temperature.
·2 channels analog input (4-20mA), 1 channel analog output (4-20mA or 0-10V), dosing pump control or date monitor, 2 channels pulse signal output (proportional to the current signal, the maximum pulse frequency can be set).
·In automatic mode , three work types are optional:
(1) Dose in proportional with flow
(2) Constant residual chlorine PID control
(3) Work according to the upper and lower limit of the setting residual chlorine.
·In manual mode, separately adjust the dosing frequency and control the heating equipment and stirring equipment.
·Large size LCD display the temperature and setting date
·Protections: shutdown at low level, under voltage and lack of water
·Remote start and stop function
·Power-off storage, store the status before power-off
·Automatic shutdown and delay washing
·ABS plastic sealed,IP65 protection level
·Solid state no contact heating control
·Build-in multiple functions and date setting
·RS232 remote communication( maximum 255 can communicate with PC at the same time) |
Location：